1994 Ford Ranger Supercab "need special tool remove spindle" Questions

spindle, after you beat it with a hammer...lol, but seriously, and then the other side you need a special tool it is a 2 prong fork, to pry between the tranny and the shaft, and that should get it out

need any special tools to change hub bearing on a 95 honda passport No special tools needed, this Honda has the old type inner and outer wheel bearing's, remove cotter pin, spindle nut slide rotor out

...hammered to break it loose. Generally you need a special tool to remove and repress the ball joints. Some auto parts stores have a lowner tool program. You leave a deposit and they lend you the

...special pressing tools? No, you definitely will need a press. The bearing is pressed into the spindle. The hub has to be pressed out first, then the bearing has to be pressed out of the spindle. Of ...

need pictures and procedure 91 Ford pickup F250 twin I beam ball joint replacement. Wheel Spindle, F-150, F-250, F-350 Removal Raise the front of the vehicle and install safety stands. Remove the ...

...special tool you'll need is a tie rod seperator. If the arm is a part of the spindle and cannot be removed easily: 1) Put vehicle in park and safety brake on - chock the rear wheels 2) Lift passenger ...

...special tools required ? is there a writen proceedure that I can follow ? Thanx so much. you need to remove the spindle assy from the truck & press the bearing out & in or you need to use a tool ...

...need to be removed out of the spindle and either a special tool to do it on the car needs to be used or the entire spindle removed and carefully pressed in and out. if you so choose to take this ...

...need any special tools? You need air tools, many differnet size sockets and a press. The strut/spindle and lower control arm have to come out all together. leaving the axle in the car.The spinlde ...

...Pacifica touring car. I already removed the 4 hex head bolts do i need a special tool or a bigger hammer? if you already removed the bolts that attach it to the spindle then you need a bigger ...