1994 Ford Ranger Supercab "mass order" Questions

Ad

Question about Ford Ranger

1 Answer

...the firing order is off it runs but has a miss and pops when you give it gas what is the firing order it has 2 coilpacks what do you think is the problem i would check the mass air flow sensor ...

Ad

mass air flow sensorĀ . also sounds linkĀ Sounds like a bad clutch or pressure plate . this all needs to bne checked. if that year had a coil pack... it sounds like that is the issue U say u have 40 PSI

Ad

Question about Ford Ranger

1 Answer

...order the car engine would be shaking real bad and the engine would backfire. try disconnect the air mass sensor. if you have a bad air mass sensor and you disconnect it, your power will return to ...

...Specific to: Ford Escape 2005-2008 The Intake Air Temperature (IAT) sensor is incorporated in the Mass Air Flow assembly. Refer to the Mass Air Flow (MAF) sensor.Here's a link to the mass air flow ...

...mass air sensor fails, the car won't rev above 2500RPM in order to safeguard the engine. Get some air intake/throttle body cleaner and clean the mass air sensor. Get some electrical contact cleaner ...

...in place and remove the air box. there are 2 small bolts that hold the mass air flow to the box remove these and reinstall in reverse order. heres a couple pics to help you identify it. hops this ...

...the open-loop predicted air flow information (the measured air flow) to the ECU, and the oxygen sensor provides closed-loop feedback in order to make minor corrections to the predicted air

mass air flow sensor have fitted between air cleaner housing and throttle body, you can see wiring connector been connect on it you have to turn it anticlockwise and remove it. when you fix it back do

...but misses/back fires/etc. but drives great. I understand the MASS sensor part. but what could cause it to continue to back fire and miss? incorrect firing order for the plug leads low fuel ...

...injector pulse width in order to provide the desired air/fuel ratio. The mass air flow sensor hot wire sensing element and housing are calibrated as a unit and must be serviced as a complete

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

891 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...