1994 Ford Ranger Supercab "fan switch working" Questions

fan switch only works on high My 2003 Ranger fan switch only works on high. What do I need to replace, Switch only? Faulty blower motor resistor.

switch for fan only works on high we have checked the relay, the motor and switch but nothing worked. chk the fan speed resistors mounted on housing on fitre wall. two screws and a couple of wires.

A A/C FAN ON A FORD RANGER FAN ONLY WORKS ON HIGH, NEED TO REPLACE SWITCH this sounds more like the blower motor resistor is bad and needs replacing. try the resistor first more common than the switch

fan fuction switch only blows air to the defrost & heater vents. The AC, heat and off positions work fine. I took off the glove box and observed that the door to the blower dosen't work when switch is

Fan function switch won't blow air other than htr/defrost mode I just bought a '98 Ford Ranger SuperCab.The right fan direction switch doesn't blow air in modes other than htr/defrost. Otherwise it ...

...fan switch located? No fan switch , cooling fan relay ! located in the battery junction box under the hood in the engine compartment ! Go to www.bbbind.com for fuse box picture -location of relays ! ...

...i would say the temp switch for the fan. it sends a signal to the computer to turn it on. it is very cheap and is the most common and likely problem. good luck and please ask any more question you ...

fan for the ac quit working 1989 ford ranger it could be the motor itself, the blower motor resistor or the heater switch. if you can jump the motor with a power source, you will find if its working ...

...your air goes out behind dash and not on you also Im gonna assume you hear all three speeds of fan because if not all speeds are working you may only get low speed if not replace/clean blower ...

...fan only blows on high. have checked fuses, circuit breakers, and relays???? My Windstar cruise quit, and after lots of looking it was the "switch" on the brake master cylinder. Only when the switch ...