1994 Ford Ranger Supercab "clutch line retaining clips" Questions

Ad

clutch line leading into the clutch slave on my ranger ripped out, got new line, cannot buy clip without slave. 1994 4.0L V6 Ford 5 speed. I do not want to pay to pull trans as well as for a new slave

Ad

Were can i buy new new clutch line retaining clip? You can purchase a clutch line retaining clip at your nearest AutoZone or O'Reilly's or any manufacturer that your car

Ad

Question about Ford Ranger

2 Answers

...clutch housing with the hydraulic line facing down and rotate about 1 / 4 turn clockwise while pushing it into the housing. Lubricate the clutch pedal pin with silicone grease, then connect the ...

...clutch line and carefully push the pushrod back into the cylinder pushing ait bubbles out up to the reservoir on top. Return the retainer clip and bolt the slave cylinder back on. A few pumps and a ...

Question about Ford Ranger

2 Answers

...clutch cover-to-flywheel retaining bolts one turn at a time in a crisscross pattern. The pressure on the clutch disc must be released GRADUALLY. Remove the clutch cover-to-flywheel bolts. Remove the ...

Question about Ford Ranger

1 Answer

...clutch pedal. The master cylinder has two lines going to it. One line will have a short peice of hose and clamped to the master cylinder. Loosten the clamps and twist the hose on the pipe and master ...

...line, unbolt unit from the firewall, then under the dash, there's a rod from the clutch pedal to the master cylinder. Just undo the retaining clip or pin holding the rod to the pedal. When the new ...

Question about Ford Ranger

1 Answer

...clutch actuator (slave) cylinder line - 1995-96 vehicles Remove the transaxle, as outlined earlier in this section. Mark the pressure plate assembly and the flywheel so that they can be assembled in ...

Question about Ford Ranger

2 Answers

...retaining the fan blade to the fan clutch * Seperate the blade from the clutch **Important note** While you have everthing out check your belt for excessive wear. Easier to install with stuff out out ...

Question about Ford Ranger

1 Answer

...know the part number of the retaining clip that holds the clutch line in the slave cylinder on a 2003 cavalier go to a chevy dealer and ask the parts guy to show you the illustrated parts

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

891 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...