1994 Ford Ranger Supercab "add fluid clutch cylinder" Questions

Ad

Question about Ford Ranger

1 Answer

...fluid to remove all the air. You do not want to add additional air to the clutch system. Open the bleeder valve located on the internal cylinder with a 7mm wrench and quickly attach the flex line to ...

Ad

...fluid as suppose to and NEVER had to add any.so hrs later curristy b4 wrecker service showed up started to work fine again. so i drove it home no problems out of it yet but being high milage its time ...

Ad

Question about Ford Ranger

2 Answers

...add DOT 3 brake fluid to the clutch master cyliner a few bubbles came up and after I pump the clutch peddle a few times the clutch got really stiff and when I try to put it in gear it grinds really ...

add tranny fluid to it in order to lube it up some..it is a 2.5 5 speed manual btw. Thanks Dennis fix the clutch problem if cable replace the cable If hydraulic , bleed the air out or replace both the

...fluid,if empty,then your slave cylinder is bad. Hello Robert Wilson, Shift lever position is of paramount importance... FORCE NOTHING...!! You can see by the AMAZON add below your "SHIFT KIT" REPAIR ...

Question about Ford Ranger

3 Answers

...add brake fluid. You might be lucky enough to get it to bleed by just pumping the clutch otherwise you'll have to use the conventional method. If it's a slow leak you can just add fluid once ...

ADD BRAKE FLUID TO THE MAX LINE DONT OVER FILL.IF MASTER CYLINDER RESERVOIR IS EMPTY.CHECK FOR FLUID LEAKS AT CLUTCH LINES AND CONNECTIONS AT CLUTCH RELEASE CYLINDER AND CHECK BRAKE LINES - CALIPERS -

...add fluid, the clutch master cyl compresses the fluid down the line/hose into the clutch slave cyl. This depresses the clutch fork/arm and disengages the clutch disc so the input shaft into the ...

Question about Ford Ranger

1 Answer

...add the clutch fluid. The brake fluid reservoir for both the brake master cylinder and clutch master cylinder. There is a line from the brake reservoir to the clutch master cylinder. Also, read you ...

...or it is out of fluid. Check the reservoir and see if your fluid is gone. If the fluid is all gone, you can add fluid but you will probably need to crawl under the car and bleed the slave

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

891 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...