power mirror switch housing. Remove the retaining screw and washer from the trim panel lower corner. Using a special door trim panel removal tool or a flat wood spatula, insert it carefully behind the
...power window motor, to know which way to go with the diagnoses. Good directions for removing the door panel are available at Muth ( signal mirror mfgr ). www.kwmuth.com Obviously only follow the ...
...mirror head ) . When you have the door panel off, reach in through the speaker opening to get to the pigtail for the power window motor. You can test with the motor still in the door with DC power. ...
...mirror light illuminates while the switch is being held. Any suggestions? Thanks Raherc It sounds like the window motor is or regulator is bound up. You will have to take door panel off and pull ...
...power and only the mirror knob and the door lock/unlock swith has power. What next?? As spyderboat_6 posted, it is 95% sure to be a bad window switch. The Ford 04-08 MY trucks changed the design of ...
power outside rear view mirror, remove the switch housing bezel by removing the two retaining bezel nuts and the bezel. 8th. Remove the screw retaining division bar to inner door panel. 9th.Remove the
power mirror works. I'm stumped?? Check the power to the power window switch on the driver's side. Std & SuperCab Engine compartment fuse panel, Fuse # 110 -> Accessory delay relay ->
switch. Does that mean the relay is bad or is the relay working and now I should start testing to see if the motor works? It is somewhat common for the motor to get dust built up on the motor brushes,
...power window motor. If you need directions on removing the door panel, Muth Co ( signal mirror manufacture ) has PDF download for the install directions that show how to get the door panel off ( if ...
583 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions