1991 Ford Taurus "4 head bolt torque" Questions

Ad

...head bolts on a 1991 ford taurus with the 3.8L engine, need to replace it, but i have no idea what the torque is....please help Torque sequence: ------------ 6 4 2 8 5 1 3 7 ------------ Step 1: ...

Ad

Question about Ford Taurus

1 Answer

...head bolts 3.0 this is push rod engine not overhead cam engine This must be done in a specific sequence In THE ORDER described. It is important to know that Ford used a torque to yield tightening ...

Ad

...Head Bolt(4)(4)-Water Outlet Connection to Intake Manifold Bolt10-14-89-123Upper Intake Manifold to Lower Intake Manifold Bolt/Stud20-3015-22-Engine Front Cover to Cylinder Block Bolt (No. ...

...head Install the bolts. Tighten the bolts in five stages in the sequence shown. Stage 1: Tighten to 50 Nm (37 lb-ft). Stage 2: Loosen the bolts one full turn. Stage 3: Tighten to 30 Nm (22 lb-ft). ...

Question about Ford Taurus

1 Answer

head bolts torque settings for 1993 ford taurus 3.0 engine These are the torque valies and sequences for your engine Torque in 2 steps [1st (33-41 ft-lbs), 2nd (63-73 ft-lbs)] Torque sequence: (for ...

96 ford econovan 2.0lt torque settings 4 head gasget please just cant find torque settings anywere for the head bolts refer to manual or main dealer could you please post the sequence thanks

torque specification for 1995 ford Taurus Lower intake manifold 4 Cyl Intake manifold bolts to heads = 15 to 23 Ft-lbs 6 Cyl 3.0L Step 1 = 11, step 2 = 21 6 Cyl 3.8L Step 1 = 7, step 2 = 15 & step

Question about Ford Taurus

1 Answer

...4 to 1 turn after gasket contacts sealing surface or tighten to 13-15 Nm (10-11 Lb-Ft). Tighten in two steps: 7-15 Nm (6-11 Lb-Ft) 26-38 Nm (20-28 Lb-Ft) Refer to illustration in the Cylinder Head ...

...4) (2) (8) (5) (1) (3) (7) EXHAUST MANIFOLD SIDE Start with 1 then 2 and so on. . Tighten the bolts to 47 ft. lbs Then back all the off 1 full turn. then in the same order re-tighten to 38Ft lbs. ...

HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs). In sequence, torque all bolts. Torque: 50 Nm (37 ft

Not finding what you are looking for?
1991 Ford Taurus Logo

162 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Ford Taurus
1999 Ford Taurus

2,348 Questions

2001 Ford Taurus
2001 Ford Taurus

2,262 Questions

2000 Ford Taurus
2000 Ford Taurus

2,120 Questions

2002 Ford Taurus
2002 Ford Taurus

1,869 Questions

1998 Ford Taurus
1998 Ford Taurus

1,431 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...