need timing marks for 1997 2.3 liter ford ranger 1. Turn the crankshaft until the timing marks on the crankshaft indicate TDC. 2. Make sure that the timing mark on the camshaft drive sprocket is ...
...brakes keep locking up had a mechanic look at them he said look ok. had them replaced 2 times in 2 years time. last feb was last brake job failed state inspection The proportioning valve is
...time.one wire came.i got mixed up i need to see a picture of the wiring from distributor to engine block what size engine! ill type you a little diagram.... 4 3 2 1 Front of vehicle coils 3 1 2 4 4 2 ...
how 2 change timing belt 4 cly Remove timing belt cover to get to timing belt, it's not that bad, you will need a harmanic pulley puller.
why no spark #1 cylinder 1992 2,3 liter with 2 coil packs and 8 spark plugs fuel injected engine CRANKSHAFT TIMING SENSOR OUT OF TIME OR OUT OF ADJUSTMENT THROWING OFF TIMING.
Do I need to remve pully on crankshaft, How do Itime engine 2.3 engine No, you don't need to remove the pully. Here's how you set the timing:You will need a timing light and a 1/2 inch ...
...2.5L engine Fig. Fig. 3: Releasing the timing belt tensioner using a special tool Rotate the engine so that No. 1 cylinder is at TDC on the compression stroke. Check that the timing marks are aligned ...
Timing order on a ranger 88,2.9 liter .Firing order 1-4-2-5-3-6 --------front ' 1 2 3 ' of ' ' Distributor rotatesclockwise vehicle ' 4 5 6 '
dont no how to find my marks on the timing belt on a 89 ford ranger Check this information out. It is more concise than any overt explanation you will receive: ...
...time and then shift back to 2 wheel. Any ideas... Try going in reverse for a few feet the next time it does it. I have had problems like that on my old dodge and I would go in reverse for a few feet ...
417 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions