1991 Ford Ranger Supercab "intake gasket" Questions

...intake manifold gasket on 1993 ford ranger 4.0 I am replacing an intake manifold gasket and found that the replacement gasket did not extend all the way to the front and back of the engine like the ...

anti freeze leak from lower intake gasket in back of motor Sounds to be your intake gasket is worn out. make sure you put high temp. syclacone when replaceing, Good luck to ya.

intake gasket Help finding a kit to change intake gasket try your local library...mine has a ton of repair manuals for all makes and models Well be it a V6 or a 4cyl. find the corresponding bolts/nuts

i have anti freeze leaking out of the left side in the back of the motor but its not the heater core lines. i personaly think its the head gasket. what do you think Could be the intake gasket

...coming up from timing chain cover against the block is there a gasket there or is it the block cracked THE INTAKE MANIFOLD HAS COOLANT FLOW.COULD BE LEAKING AT THE GASKET WHERE COOLANT FLOW

...intake gasket checked. spray carb/choke cleaner around intake gasket and if rpms change then you have a bad gasket which causes rough idle bad fuel econ u should do a compression test to rule out ...

Dont start it anymore have the engine rebuilt. If you do not do a full rebuild you are risking major damage. Right now you can probably get away with a simple gasket and bearings kit and a new intake

...that it really is running way to lean. This is usually caused by a vacuum leak. Make sure you intake hose from MAF sensor (air filter box) to intake is secured and has no leaks, then move on to ...

...code is P0174 P0174 is bank one too lean. to solve: First check for vac leaks. In the sohc the intake manifold gaskets are the primary culprit. They are cheap around $20.00 and easy to replace. ...

...the intake someone help!might be the module but i got spark...? if it has a check engine light on have it tested to see if you have blown the intake gasket by trying to start it and it was out of ...