...high speed. I have changed the switch still the same. Is there anything else I can do to fix this problem? There is a wiper speed control module or governor behind the instrument cluster. You ...
...speed, and high speed. There are not 3 relays, but 1 for all functions. If you have power to the high setting, the relay is working. That's normal on some cars. Did it ever work intermittent at hi ...
...high speed and low, but will not turn off unless i take out fuse The multi-function switch might be bad. Check it out. If it is bad then replace it, if not, then there might be a few exposed wires or ...
...High Speed Circuit Motor Failure GEM GO to the Symptom Chart. B1840 Wiper Front Power Circuit Failure Open/Short to Ground GEM GO to Pinpoint Test A . - All Other DTCs GEM REFER to Section
Question about Cars & Trucks
high speed...? ' Yahoo Answers https://answers.yahoo.com/question/index?qid... Nov 11, 2006 - My windshield wipers only work on high speed. ... If it's the compound switch on the lever on the steering
Question about Ford Ranger
...speed. High Speed Operation When the wiper switch is in the high speed position, ground is applied through the windshield wiper switch high signal circuit to the body control module (BCM) indicating ...
Question about Cars & Trucks
...high speed , have changed relay on motor and still same problem The is the symptom of a defective wiper switch. Do you know how to use a DVOM - digital volt ohmmeter to test electrical circuit's ? ...
Question about Pontiac Cars & Trucks
...High Speed Operation In the High position, the windshield wiper/washer switch supplies voltage to both the wiper 1 and wiper 2 relay coils. This energizes both relays and allows battery voltage from ...
Question about Ford Ranger
...high speed. High speed doesn't work at all. When I use the intermittent speed and low speed on my windshield wipers they work fine. I turn the knob to the high or fast speed, wipers don't work at all ...
...high speed operation are controlled directly by the wiper/washer switch. The windshield wiper/washer switch supplies voltage on the signal circuits to the BCM for windshield wiper/washer operation. ...
417 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions