1990 Ford Ranger SuperCab "difficult engage 1st" Questions

...difficult to engage When gears could not be selected while running, I replaced flywheel clutch and pressure plate on 2004 VW Touran now 1st, 3rd and 5th gear (grinding on fifth) difficult to engage. ...

...1st, goes smoothly but then 2nd is difficult as stick has to "pop up" from being depressed from going into reverse. Stick also has a LOT of play while engaged in any forward gear. Sometimes ...

...difficult to engage 1st gear #1. Try putting in second gear, then go to first. #2 Try putting it in reverse, come off the clutch just enough to move the car slightly, then put into first. Let us know ...

...difficult to select 1st and 2nd gear, sometimes i have to pull away in 2nd gear and am able to select 3rd-4th-5th gear ok and sometimes can slip it into 1st ok.. is this the gearbox or the clutch ...

...difficult to engage, accompanied by a crunching sound, mainly 1st and reverse but only when the engine is running. Also it gets stuck in gear whilst driving. Is this a clutch problem or gearbox or ...

...difficult to select 1st gear or reverse ) I would be looking at the drive shaft "U" joints and cv joints first because once a clutch is engaged there will be no noise under acceleration of ...

difficult to engage into 2nd (you really have to place it just right, which isn't easy). It doesn't happen every time, but at least 20% of the time it grinds. It's a 4-speed hydraulic clutch. Debating

...difficult to select gears. Then totally failed to get into gear. after 10 minutes managed to select 2nd. After coold down all normal again. No smell from clutch . Do I suspect gear- box or clutch ...

...engage foot feed slightly at idle to keep running. Bogs down when accelerating. Picks up speed while backing off accelerator. Seems to run more smooth once highway speed is finally attained. Was told ...