1985 Ford Mustang "block number located engine" Questions

number is located on the top surface of the engine block... near the crankcase breather pipe, front-left side of the car. Except for the information that is provided on the vehicle certification label

...number on my car Im looking at, strange or not, I was told the engine no. on the car Im looking at was C5AE6016 (5B11W) Thanks on the edge of the block by the trans mount, or on the side of the block ...

...number, on block? Can engine be identified by accessories or parts attached? We have a 1985 Volvo with conversion with a Mustang engine, no idea what year it is Check the computer they would had of ...

...block number location 2001 mustang 3.8 SHOULD BE NEXT TO THE MOTOR MOUNT ON THE BLOCK AND IT IS NOT STAMPED IN LIKE YOU THINK.. THEIR IS A SMALL FLAT SPOT AND IT IS ENGRAVED . SO BE CAREFUL WHEN ...

...block stamped number location its by the motor mount bracket area.. on the block.. its really hard to see. so you need to clean it off really really good.. and don't use a wire brush for they are not ...

...located on the engine? My car is a 1969 Ford Mustang Super Cobra Jet with a 428 Engine. the dipstick and tube go to the sump it is at the very bottom of the engine block should be a large smooth pan ...

...NUMBER LOCATED ON A 1967 MUSTANG COUPE WITH A 289 V8 ENGINE. THE FIRST ANSWER I RECEIVED WAS ABOUT SPARK PLUG WIRING WHICH WAS NOT WHAT I ASKED. THE SECOND ANSWER I RECEIVED WAS WHERE THE TEMP SENSOR ...

block that will allow antifreeze from under the intake manifold to leak into the transmission bell housing area. When this tube or hose leaks, it often gets mistaken for a leaking rear expansion plug.

...block casting number. The numbers are raised, not stamped into the block and consist of seven numeric digits. The digits can be located on either side of the block. The seven-digit number may be ...

...number is typically located on the engine block itself. The exact location can vary slightly depending on the model year and specific configuration, but it's commonly stamped onto a flat surface on ...