1983 Ford LTD "wiring" Questions

1983 Ford LTD Wagon - wiring I am looking for a wiring schematic for the 3.3 straigt 6 engine. I had a short in one of the wires that was green and said "fusable link 14 amp." I don't know where the ...

56 ford y block, what colors go where on the coil? doent matter if its an old motor with a coil ,the coil is marked + and - but in honesty with a very old motor it doesnt make any difference OLD ...

wiring to starter cylinoid for a 1984 Ford Ltd Brom ? I need assistance wiring a starter cylinoid for a 1984 ford ltd bromgh Step1 Disconnect the black negative cable from the battery. Step2 Raise the

i have a 1986 ford crown vic that has i fluctuating idling the battery is bad but i dnt know if that would cause it would that be the problem or should i replace the tps censer also? the battery may ...

need wiring diagram for 1966 ford ltd wiring diagram for 1966 ford ltd if it was me i would stop by a ford dealer in the parts department to see if they can help you are your local autozone,napa and ...

i need a stereo wiring diagram I'm looking for a stereo wiring diagram for an australian 1991 ford falcon EA could anyone help me? you can just buy a addapter plug

where can I access free wiring diagrams for a 1977 Ford LTD? Might not be a complete set, but there are some at ...

where does number 1 piston need to be..do u go off that or piston 8 #1 should be all the way up.This is called TDC(Top Dead Center) U go off #1, it must be at TDC (top dead center) compression stroke.

I would suspect you have mixed the plug wires up or set the gap incorrectly. Here are photos of the wiring diagram for the 5 different engines installed that year. I may not get them all on this post.

Temp gauge not working 1991 ltd crown vic Find temp. sending unit on engine. If one wire type ground that wire to good engine ground, with key on gauge should go all the way to hot. If it does replace