ROVER MGF.REMOVING WIPER MECHANISM. all relevant screws and fixings +wipers removed. cannot feed loose mechanism out from scuttle.seems to be hindered by clutch cylinder pipes. any ideas please. ...
how to replace a front windshield wiper motor? You need to pop your hood up, remove your windshield wiper arms but make sure you mark the position of the arms marking on the arm and arm attachment for
where is the evap purge control valve located on a 2001 windstar It's under the hood, looks like near the firewall in the middle. #2 is it. Please rate if this helps located on the firewall in the
where is the ecm located at LOOK BACK UNDER THE WIPER PANEL UNDER THE HOOD STRAIGHT BACK BEHIND THE RIGHT STRUT TOWER YOU WILL SEE A BIG PLUG AND TWO BOLTS HOLDING IT IN REMOVE BOTH COWL COVERS AND ...
replaced belt tensioner and now the belt is to long 2001 windstar with 3.8 Your complete post does not display. So, I can only assume the rest says your belt is to big or to small. No matter what the ...
how do i to the back 3 plugs on the windstar? I have a 1998 Ford Windstar 3.8l. what is the best way to change the plugs on the back side? Try to get at them from under the vehicle. with the van up in
air not coming thought front vents only from top on 2000 ford windstar ave you had any recent work done under the hood, or with wiper cowl etc.. reason being there is a main vacuum line that goes to a
how do you remove the computer out of 99 ford windstar THE COMPUTOR IS under the hood on paseger side under wiper cowl disconnect battery remove bolt securing electrical connector then the ...
Question about Ford Windstar
Why does my Ford Windstar not start after going through the car wash? one of the harnesses are getting wet and keeping it from starting. hose your vehicle down at home and then open the hood after ...
546 questions posted
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
1,032 Questions