...Stabilizer Bar Removal Raise and support the vehicle. Refer to Section 00-02 . Support vehicle with hoist or safety stands behind front sub-frame (5C145). CAUTION: To avoid damage to the 6 mm drive ...
...stabilizer bar and the strut. You will need to check them with both wheels on the ground. you will be able to move the ends in and out or up and down if they are loose/sloppy. If those are tight than ...
...stabilizer bar link ball stud, do not use an Allen wrench to break loose or tighten to final torque the front stabilizer bar link-to-front shock absorber nut. Remove the stabilizer bar link retaining ...
...stabilizer links (meaning they haven't been changed before) I usually use a large pry bar to break them off of the ball studs. Then I use a pair of Vise-Grips to hold the ball-end while I remove ...
...STABILIZER BAR.POSITION THE DASH OPENING WEATHER SEAL FOR THE STEERING COLUMN OUT OF THE WAY.REMOVE OR DISCONNECT THE FOLLOWING.REMOVE PINCH BOLT RETAINING THE STEERING COLUMN INTERMEDIATE SHAFT ...
stabilizer bar link at the front stabilizer bar. Make sure the CV-joint puller does not contact the transaxle shaft speed sensor. Damage to the sensor will result. Install a CV-Joint Puller (T86P-3514
...stabilizer bar (5482). Refer to Section 04-01 . Disconnect heated oxygen and catalyst monitor sensors. Support flex pipe. Remove bolts and disconnect flex pipe from the converter. Raise dash opening ...
...bar(Stabilizer bar) My front stabilizer bar(sway bar) is broken. I have a new one and i was wondering how do i install one? please give good rating if this helps Section 04-01: Suspension and Wheel ...
Question about Ford Windstar
...stabilizer bar on a 1996 Ford f150 my stabilizer bar broke I replaced my driver side balljoints before realizing it was my stabilizer bar If it's the actual stabilizer bar....remove both stabilizer ...
Question about Ford Windstar
...out what is the torque to bolt it back up 1. stabilizer link to strut nut 6 - 12 ft.-lbs; 2. stabilizer link to stabilizer bar nut 6 - 12 ft.-lbs; 3. stabilizer bar U clam bolt to body 20 -30
698 questions posted
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
1,032 Questions