1989 Ford F 250 "stater bad replaceing starter switch" Questions

Ad

...to full start position. I can jump start truck from cylinoid. I have replaced ingnition switch, battery and key assembly. try tapping stater with hammer then try to start it if it cranks starter is ...

Ad

stater motor and new battery i have problem to start,after 3 or 4 time when i tund the key start Probably bad ignition switch where the key is. OR the line connecting to the starter solenoid terminal

Ad

stater is a 3.5 CHECK BATTERY VOLTAGE IT SHOULD BE 12.5 VOLTS.IF NOT BATTERY WEAK NEED CHARGING OR REPLACED.IF BATTERY GOOD.TURN IGNITION SWITCH TO ON POSITION WITH ENGINE OFF.DASH LIGHTS SHOULD LIGHT

...stater is bad. Ok, the battery was replaced because the lights were left on. There were no issues prior to the battery going dead. Are you sure the connections are tight at the battery??? No small ...

stater motor has gone bad, the clicking is the starter solenoid, but the starter motor is not working, replace it. A bad starter motor can do this. You will need to either bring the starter motor to a

...stater clicking, if not i would checkand make sure your nuetral safety switch isnt bad if it is clicking i would make sure the starter isnt hung up in the flywheel or could be a possibility the ...

...stater motor. Hi DO NOT put a bigger fuse in ,you need to find out why the fuse blew in the first place,it is unlikely to be the starter motor,it could be a bad connection,the mercedes all have ...

...stater is good sometimes it will start just fine and then sometimes it will do nothing give 5 or 10 min. and it will start.. maybe a relay?????????? A number of items could cause this. 1 Worn shift ...

...bad starter solenoid. Any ideas would be appreciated You need to remove the stater and get the worn contacts replaced. When you turn the key to start, and you get "one click", that is the starter ...

...stater solenoid and I am unable to trouble shoot it. I figured my starter had gone bad, so replaced the starter and still same issue. I even bypassed the electrical junction box and wired a push ...

Not finding what you are looking for?
Cars & Trucks Logo

496 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...