1989 Ford F 250 "remove 5 speed manual" Questions

Ad

My manual 5 speed is popping out of 5th and 4th gear? 1989 with 5.0 302 single cab long box. any ideas???? please have the gearbox removed and let the technician check and replace the gears rod locks!

Ad

...5 speed? Fluid - M/T: Fluid Type Specifications The manual transmission models M50D; Borg-Warner T-18 and ZF model S5-42 each use Motorcraft MERCON© Multi-Purpose Automatic Transmission Fluid ...

Ad

...5 speed manual. Clutch must be to the floor before I can get it into gear. Is this normal? No, your clutch is controlled by a slave cylinder and clutch master cylinder. Check your clutch master ...

Question about Ford F-250

1 Answer

Remove CMP sensor and inspect for signs of contact with the pulse wheel. Make sure the holes on the end are filled with epoxy and inspect the connector mating cavity for signs of oil contamination. If

Question about Ford F-250

2 Answers

...5 3511 Steering Column Lock Cylinder Housing 6 13K359 Multi-Function Switch 7 N808114 Pin 8 N805857 Steering Column Release Lever Pin 9 3D544 Steering Column Release Lever 10 3F609 Tilt Wheel Handle ...

...remove the back-up lamp switch assembly. 4. Install the switch with pipe sealant and tighten to 80-84 inch lbs. (9-9.4 Nm). 5. Attach the switch electrical connector. 6. Connect the negative battery ...

How do I remove a 1999 Jeep Cherokee 5 speed manual transmission? Jeep Grand Cherokee ZJ 5 2L V8 5 speed manual swap Explanation

Question about Ford F-250

1 Answer

...5 speed manual transmission. On the Left side of the trans-axle, Half way Up you will find the filler plug. Remove the plug. You can check with your finger. If you can not touch the lube oil you need ...

Question about Ford F-250

1 Answer

...5 speed manual. The 5 speed manual transmission in your Focus doesn't have a Dipstick, the fluid level is checked by going under the car and removing a fill plug on the side of the transmission ...

Question about Cars & Trucks

1 Answer

...remove my broken automatic transmission and replace it with a 5-speed manual one. Will my factory ECU still continue to work without any flashing or recoding procedures? My car is a 1999 VW Passat ...

Not finding what you are looking for?
Cars & Trucks Logo

496 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...