1989 Ford F 250 "install 89 truck ignition" Questions

Ad

...ignition coil on spark plug. Install ignition coil bolt. Tighten to 10 Nm (89 in. lbs.). Reconnect the ignition coil electrical connector. Install the air cleaner outlet pipe if removed

Ad

install a ignition swicth for 89 mustang gt cannot turn the ignition to on postion try moveing your stearnwheel back and forth and trun the key at the same time. but i hate to tell you will have to re

Ad

...Install the two mounting bolts. On 1986-89 RX-7s, torque the bolts to 24-33 ft. lbs. (33-45 Nm). Install the front starter bracket, if removed. Connect the starter wiring to the appropriate solenoid ...

...Ground Strap Bolt : 89 INCH pounds. Spark Plugs : 15 FOOT pounds. Ignition coil to camshaft cover bolts : 71 INCH pounds. Coolant pipe AND Fuel line bracket bolts: 89 INCH pounds. Good

...89 olds keeps running installed new battery this afternoon; as soon as i did the heater blower fan came on ; no keys in ignition; now won't stop running? replace the blower speed control module ...

Question about Ford F-250

1 Answer

...89 Jeep YJ, my son and I just installed a new radio, had to completely run all wires which had previously been gutted. Now that the radio is installed, only part of the fuse box is working. Things ...

Install or connect the following: Starter Mounting bolts and shim. Torque the bolts to 33 ft lbs. (45 Nm). Wires. Torque battery wire nut to 89 inch lbs. (10 Nm) and ignition nut to 18 inch lbs. (2 Nm

Install or connect the following: Dielectric compound to the inside of the coil boots The ignition coil with a twisting motion while pushing down The ignition coil retaining bolt Torque to 53 inch-lbs

89 buick century ignition switch Hi iribosa. Here is the step-by-step instructions: 1. disconnect neg- battery cable, 2. then remove lower interior covers 7mm screws or 9/32. 3. locate cable for shift

...ignition switch, checked and replaced all fuses. Hi!! I have a 89 F-350 and had same problem. Check your turn signal switch connectot, it may have come unplugged when replacing the ignition switch, ...

Not finding what you are looking for?
Cars & Trucks Logo

496 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...