1989 Ford F 150 "tie rod removal f150" Questions

Ad

...tie rod, remove holding nuts and peparate tie rod then spindle assembly, a ball joint separator works here, then remove c clip holding ball joint and press out (need a ball joint press here), press ...

Ad

Question about Ford F-150

1 Answer

...rod retaining bolts to allow you to pivot the spindle{this may also require you to remove the tie rods and swaybar end links.Step 3 pry between the axle and transmission.there will be a lot of force ...

Ad

Question about Ford F-150

1 Answer

...tie rod end remover. Remove the Pitman arm-to-gear nut and washer. Matchmark the Pitman arm and gear housing for installation purposes. Using a 2-jawed puller, remove the Pitman arm from the gear. ...

Question about Ford F-150

1 Answer

...tie-rod nut and separate the tie rod from the knuckle. Remove the upper ball joint nut and separate the upper ball joint from the knuckle. CAUTIONDo not damage the hub seal. NOTEAllow the steering ...

...tie rod end? Did you recently change your tires and/or wheels? Wheels can have different offsets, so choose carefully if you change them. I had problems with my track bar on mine. It was wrecked ...

...tie rod, remove cotter pins on both ball joint nuts and remove nuts, then separate hub from i-beam, on the bench remove spring clip holing ball joint and press out, press in new joint and install hub ...

Question about Ford F-150

1 Answer

...4X4 Roush F150 Have the tires been removed from the rim and rim spun on balencer to check how straight the bead surface is ? Strut Leaking fluid ? Ball joint or Tie rod bad ? wheel bearing wobble

...tie rod end, ball joint, steering sector, or some part of the suspension. Put the vehicle on a rack and inspect all components. Remove the front wheels and inspect the brake system. Torque the lug ...

Question about Ford F-150

1 Answer

...tie rod end. (I think it's 13/16) and gently tap the tie rod end stud out. You probably have to put a jack under the lower control arm and jack it up some so that the tie rod is not at too big of ...

...tie rod ends? XLT RWD regular cab w/v8 and ABS (light is on) Raise your front end off the ground and put up on jack stands for safety. With tire off the ground grad it with one hand at the 12 O'clock ...

Not finding what you are looking for?
Cars & Trucks Logo

1,066 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...