1989 Ford F 150 "gasket head cam housing cover" Questions

Ad

...head and valve cover gaskets. I would give the engine a good degreasing and drive for an hour or so. If the engine isms clean it should be fairly easy to trace the leak. Was the rear cam seal

Ad

...head gasket. Will an oil change rectify this? or is there something else i could do. I am afraid to drive it to the mechanic with the fear that I could blow my engine. This could be just old oil and ...

Ad

...gasket, it uses the same sealant/glue as the head top. Are you sure you have a leak at those seams? Oil can migrate and be actually from a different source. Oil filler gasket, cam seals, oil cooler ...

Question about Ford F-150

2 Answers

...head gasket of a 96 2.3 engine. Had head surfaced. Engine runs good but has oil leak on right side of engine- looks like under thermostat housing. It is running down crossmember on to exhaust leaving ...

head gasket,head set,tappet cover gasket,water pump,cam belt with tensioner,venthose ,tube,housing,flange,stretch bolts,oil filter,exhaust gasket,flash,coolant,ignition oil,plugs and after all this my

...head gasket and had head check and it was warped but no cracks but still overheats and needs another temp sensor.when i find the cause i'll post it. boiling coolant in the resevoir is a sign of blown ...

head gasket job on a 91 honda accord lx put it at top dead center, also when you remove the cover rotate until mark on crank gear lines up with mark on oil pump housing ,it right behind the gear, also

gasket tops list. the 2 distributor o-rings, leaks down bell housing. or the distributor base housing not mounted and sealed by the book. (need book?) front cam seal (cover off look)? front crank seal

...head gasket was blown as there is water in the oil. I changed the oil put in new plugs, took it down and it passed its smog test easily. I began to tear down the engine and after removing the intake ...

Question about Ford F-150

1 Answer

...gasket. Not on the front of the head but on the side where the exhaust manifold is attched at the forward end of the head. The crankshaft position sensor is located on the same side (right) but is at ...

Not finding what you are looking for?
Cars & Trucks Logo

1,066 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...