1989 Ford F 150 "fix interior light" Questions

Ad

Question about Ford F-150

2 Answers

INTERIOR LIGHT STAYS ON! HOW DO I FIX IT If only the door ajar light and interior light is not working it is probably the door ajar switch located on the door latch inside the door. sometimes a little

Ad

Question about Ford F-150

1 Answer

fix it, check the individual switches. If you can locate the switches, pull them out of the car body. If the lights go out, the switch is bad. In case the switch has two wires rather than one, pulling

Ad

...interior lights will not go out nor will the exterior rear light There is something wrong with the door latch. This happened on my truck. There are two options: replace the latch, not sure how much; ...

Question about Ford F-150

1 Answer

...interior light does go on. Any suggestions on how to fix it my self? I am a master ford tech and see this concern weekly ! more often then not its a dirty door ajar switch which is located in the ...

fix my door ajar light stays illuminated When all my doors are close the door ajar lights stays on its a bad door ajar switch. which one? you would need a scan tool. but the drivers door does get used

...INTERIOR LIGHTS. BUT I DO HAVE TURN BRAKE AND BACK UP LIGHTS ANY THOUGHTS ON HOW TO FIX OR REWIRE OR SHOULD I JUST LIGHT A MATCH AND TOSS IT IN. TURN YOUR CAPS LOCK OFF, FOR ONE THING. No, dont light ...

...interior lights won't come on. If it's blown, look at the sensor by the master cylinder, it's probably cracked and saturated with brake fluid. Qick fix is to disconnect the sensor and ...

...interior lights won't come on and wipers don't work. If that's the case look for the sensor on the master cylinder. It'll probably be soaked in brake fluid. Quick fix is to disconnect ...

clicks have a short inbetween the fuse box inside and the door switch, a broken wire most likely. i fixed a ford tuarus that had that same problem, was a broken wire where the door opens in the rubber

interior lights won't come on. If it's blown, look at the sensor by the master cylinder, it's probably cracked and saturated with brake fluid. Qick fix is to disconnect the sensor and replace the fuse

Not finding what you are looking for?
Cars & Trucks Logo

1,066 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...