1988 Ford F 350 "starter hung" Questions

Starter starts turning as soon as you connect the battery This would be a hung starter solenoid. usually the best thing to do is replace the starter, the solenoid is located on the starter .

...starter ws hung, The starter being loose or worn out will let the gear climb up on a tooth of the flywheel. once cleared it may start right up. if there's alot of gear noise then the starter and or ...

...starter is still hung up on something what could be the problem getting it out? Thanks Karen Yes...this has a suppot on the front of the starter with a 7/16 nut REMOVES  STARTER WIRES AND REMOVE ...

...The starter is new, so it can't be the starter. Can it be the ignition lock? check the relay between the fuse and starter......they get hung-up now and again.......cost to repair yourself about ...

...spun but did not engage the flywheel. where do i start? begin by removing and cleaning all battery cable ends and connections. Bendix drive in starter may be hung up but it's driven by the

...I hook the battery up? I changed the starter solenoid and ignition switch and it still does the same thing. Starter bedix is hung engaged. Remove starter and free bendix and perhaps lube moving

need to fix or replace starter the starter is hung up or dead. I need to find the starter so that maybe I can jump it follow the positive battery cable down to the starter

...starter stays hung up with the flywheel for about ten seconds after it starts is there any way to shim starter away from flywheel Change starter Bendix, or whole starter. Bendix is sticking... not ...

...hung in the start position, that would keep the starter spinning even after you release the switch. I would consider replacing the ignition switch. Look over on youtube for a how-to video. On a ...

...starter teeth are getting hung up in the flywheel and won't release after starting. The return spring in the starter solenoid has broken and won't retract the starter gear. If the starter has been in ...