1986 Ford F 250 "spark plug firing" Questions

...spark plug wire and remove number 1 spark plug.need a helper turn crankshaft bolt with wrench while finger over number 1 spark plug hole.you should feel compression.align the TDC MARK on the ...

...idle and when speeds reach 40 -60 I just replaced spark plugs and spark plug wires, engine still has a miss fire at idle and at certain speeds. Did you replace the dist cap? check also for vacum ...

...changed ignition mod coil and distribiter and still have no fire can anyone give me some ideals to check are you getting spark out of the coil? what about out of the distributor to each spark

...spark plug wires go in order from distributor to spark plug in the motor on fords the cylinders are numbered in a row unlike a cheverolet if it is a v 8 that is. right and left side of the motor is ...

spark at the plug wires first check the ignition coil take off the plug that goes to the distributor and check for spark if there is spark the next thing would be the ignition control module (which is

spark plug wires I would definately change them, the inner silicone cores can fracture internally causing the same situation of no spark, if the vehicle has a distributor cap check the segments in the

What is the order in which the spark plug wires go on the distributor and spark plugs on a 400 6.6 79 ford truck? the firing order is 1-3-7-2-6-5-4-8

1993 ford f250 will not start, no fire or spark truck has set all winter, problem being the starter went out, changed the starter...no start, no fire....since then ive changed the distributor, cap, ...

...like a load miss. Chk plug wires for deterioration and or cross firing. Wires should not cross over each other. Worn plugs load wires causing increase spark out put increasing cross firing ...

...4 stroke . changed coil new spark plug , The stator may be your problem. Sometimes a faulty stator can test good on a ohms meter, but under a load may not supply the spark needed to fire up the