1986 Ford F 250 "86 460 engine" Questions

86 f250 460 problems 86 Ford 250 I got the truck few months ago it had a crack in the origial 4180 carb sitting on the 460 while they wanted to much for new 4180 so I bought 1407 Eelbrock carb for it ...

460 out of my 76 lincoln and put it in my 86 f250 and put the oil pressure sender out of the 86 engine into the 76 engine and only worked for about an hour then quit any suggestions and trying to find

86 f250 460 engine has hard time starting; New fuel filter, rebuilt carb, new plugs, new dist cap and rotor... i have to pump a few times, crank,,,, pump some more and then crank again for it to start

...86 ford f-250 w/ a carbed 460.no fuel to carb. was told i had very low oil pressure.would changing oilpump and assending unit fix my propblem? do i have to pull motor to change oilpump? what causes ...

...86 F250 with a 460 engine had pumps in the tank. Driver side of the motor toward the front, next to the exhaust manifold behind the radiator hose if you have a mechanical pump. Inside the frame rail ...

...86 wont start, I have replaced everything up to the distrib, including the strator, ICM, cap , rotor, plugs etc. I have fuel to the carb, but no spark past the coil. The engine is a 460 CI. the truck ...

86 ford f-250 460 stick shift where is the fuel pump located at? how do i get it out and replace the fuel pump? Hello, The fuel pump should be on the front lower block on the Drivers side. Sometimes ...

...for alternator , voltage regulator charging system. Engine is a 460 cu. in 4bbl someone's bypassed wires from alternator to fuse box Get a manual for a 86 ford econoline from an auto parts

86 ford 460 cu. in. Ford w/ Holly four barrle carborator secondary secondary barrels do not seem to kick in when excelerating past 45 mph.. It will not go faster than 45 mph. On most models, the ...

...86 ford truck with a 460, manual trans, 4bbl loses power at a specific rpm. Idles fine, runs good at lower rpm, but when you try to accelerate, it will rev to a certain rpm then begins to miss, ...