1984 Ford F 350 "fuel line" Questions

Ad

...fuel line banjo bolt at the pump. Remove the fuel line fittings at the rear of the cylinder heads. Remove the fuel lines assembly. Loosen the two hose clamps at the fuel pump fittings. Disconnect the ...

Ad

...fuel line retaining clip and discard, then remove the fuel line from the fuel pump. Slide the clip up and off from the quick connect fitting. Insert the fuel line tool and remove the fuel pump ...

Ad

...fuel line holding the fuel filter (new ones supplied with new filter). Use the tool to insert into the fuel line to remove on both sides. Once lines are removed, remove fuel filter and replace with ...

Question about Ford F-350

1 Answer

...fuel line may separate at the connection to the main fuel bundle. If the fuel line separates, an operator may notice a gasoline odor and/or fuel on the ground, loss of power, and the Engine will ...

Question about Ford F-350

2 Answers

...fuel line How do you bled the air from the fuel line, and how long should it take for the truck to start . If you have air in your fuel line it may have a crack in your line ,do you have a clear fuel ...

Question about Ford F-350

1 Answer

location of 2nd fuel filter one is in the tank. Filter Removal and Installation WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related ...

Question about Ford F-350

1 Answer

Fuel transfer issues it could be the fuel pump,the fuel pump relay.the fuel pressure regulator,a blocked fuel filter,a broken fuel line or a plgged fuel return line.

...fuel line that runs between your injectors so don't open the bag the kit comes in, until you compare the contents of the kit with whats on your motor. The kit will have new fuel line, clamps, plastic ...

Question about Ford F-350

1 Answer

...fuel line. changed all the filters. put a new in-line filter before the fuel pump. engine runs for a few miles and then dies. i have to bleed the air out of the fuel pump and then it will start and ...

...fuel line(s) and tighten to specification using Fuel Line Nut Wrench T83T-9396-A. Start engine. If necessary, purge high-pressure fuel lines of air by loosening connector one-half to one turn and ...

Not finding what you are looking for?
Cars & Trucks Logo

68 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...