1984 Ford F 150 "barrel carb" Questions

Ad

...carb was removed and replaced with a 4 barrel. Trying to buy 2 barrel but dont have this information. Can anyone help? I have ran into this frequently.1984 ford,if it is a california vehicle,had a ...

Ad

it really stinks like gas an d runs freally rough where is the air fuel mixture ona motorcraft 2 barrel carb 1980 f150 300 6cyl Sure choke isn't sticking? Mixture screws should be at base of carb.

Ad

Question about Ford F-150

1 Answer

carb and the fuel line. It is a copper looking color and it is barrel shaped. Fuel passes through immediately before the fuel goes in to the carb. Here is a picture of the part. http://www.ford-trucks

...barrel) that's by itself away from linkages etc, more to center at base of carb where it meets manifold, that is angled approx 45 degrees going in to base. That should be your mixture screw. What ...

...barrel carb 4.9 See if you can locate the emission decal located anywhere under the hood if you can see even a little part of it you may be able to match it up with one on line. I hope this helps, ...

Question about Ford F-150

1 Answer

barrel carb on it. does anyone know what it should be set at to make it run perfect? if your talking about the air mixture screws in front of the carb,they are easy to do, have your truck warmed up so

...barrel carb on my 84 ford f-150, 4.9 liter in line 6 cyl. i followed the rebuild instructions however then cvarb wants to flood and will only start with it choked. what have i done wrong? Check the ...

Question about Ford F-150

4 Answers

...barrel, part # should be on a tag or stamped on the float bowl. Please let me know if this solved the problem. If it were mine I'd just rebuild the carb and change out the fuel filter. it's not too ...

Question about Ford F-150

2 Answers

barrel carb ? I can smell gas when I first start the truck ! Todd its better to have it rebuilt......... it might be a float issue do u have black smoke when it first starts???? When you set the choke

...barrel will kick in untill the vechal is got a little speed up then it kick up hard i need it from the start Sounds like you plunger is not working rt. may need a carb kit. good luck.Could try some ...

Not finding what you are looking for?
Cars & Trucks Logo

517 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...