...fuel issue, timing is too advanced (due to faulty sensors) or just a duff temperature sensor itself. Needs investigation though as performance will be affected. (If this assists in a solution, please ...
Question about Ford F-350
...the temperature sensor. The cold start sequence is triggered by the water temperature sensor telling the engine that it is cold and needs to enrich fuel mix through the ECU. It makes starting
...fuel optimizer and cant figure out which wires are for the ats sensor if you're talking about the manifold air temperature sensor then the gy/rd wire is for signal return and the rd/wh is signal from ...
Question about Ford F-350
...temperature sensor for water and failing to go into the "cold start loop". A cold engine needs different settings to run than a hot engine. Your engine could be stuck in the "HOT" setting. Also ...
Fuel and Air Mfixing one problem can very easily reveal a problem with something that you might consider unrelated. etering DTC Description P0100 Mass or Volume Air Flow Circuit Malfunction P0101 Mass
Question about Ford F-350
...temperature.Fuel pressure regulator. Have pressure checked.It could be forcing too much gas in each time an injector opens.If you can not do this yourself, tow it in. At 2 mpg it may be ...
...temperature sensor. this sensor may be faulty as well or damaged. 11. Inspect the fuel injector cold start valve. this valve may be damaged or faulty. This list will help you track down the actual ...
Question about Ford F-350
...temperature, air mass, throttle position, etc., are all just variable resistance. I do not believe there are any solid state sensors. However, these sensors are connected to the main engine control ...
Question about Ford F-350
fuel lines from tank all the way when this happens oes it start again then in a couple of minutes it dies again if so you either have a dead spot in your throttle position sensor which is worn section
temperature. If this spring is broken, the choke will not operate. If the choke linkage is rusty or jammed with varnish deposits or dirt, it may stick or not operate smoothly. Cleaning with carburetor
582 questions posted
Usually answered in minutes!
448 Questions
438 Questions
414 Questions
360 Questions
311 Questions