engine rpms at 2500 all the time all of a sudden engine revs high cant see any vacume hoses off, cant tell if intake is leaking with rpms so high? Is it showing any codes?
cant remove fuel filter on 1999 f250 gas motor I cant get the fuel line off the the filter on my 1999 f-250 gas pickup You have to use a Fuel line Quick disconnect Tool. Different Brands make this ...
...light and interior light on when door fully closed I have a new switch to replace the old one but I cant seem to figure out the trick to getting out the old switch I have the door panel off I just ...
removing the front hub on a 1990 f250 4x4 cant get the locking spindal nut off it has four notches in it looks like it has a spring lock in it. cant get it to move is ther a tool for that yes their is
Cant Get Gas From tank To CarbuetorWas Wondering If Fuel Filter Is Along The frame is Pluged.disconect fuel line to tank and hook up l;ine to 5 galon gas can under hood fires the 6 cylinder right know
82 f250 motormounts i cant seem to get my motor mounts to break loose and i cant seem to get at the one's on the front of the motor i have tried to lossen the center bolt but it wont break loose ...
Starter cant get my starter off my F250 There is a bolt on the back side of the starter and two in the front. make sure you get the one in the back.I hope this helps.
where is the horn on a ford f250? Im trying to replace the horn on my ford f250 truck and i cant find the wiring. Your horn on this vehicle is located on the rad support.
I cant push my brake peddle down ? sounds like the break booster or master cylinder. Also maybe a vacumm issue with the break booster make sure the line is hooked from the booster to the engine intake
...much to hard to gain speed and its kiling my gass millage i thought it might be trans fluid but i cant get a read on the dip stick cant get a read? nothing on it?? if there is nothing on it you are ...
845 questions posted
Usually answered in minutes!
907 Questions
705 Questions
442 Questions
465 Questions
399 Questions