2003 Ford F250 Super Duty Crew Cab "brake pedal going" Questions

...brake pedal with hard pressure and it goes to within one inch of the floor. I tried pumping it to see if it would come up...nope! When I am driving and braking normally, everything works great. Pedal ...

...brake pedal 5 or 6 times. After doing this hold down the brake pedal and start the engine. The pedal should fall about 1 1/2 to 2 inches from where the pedal was. Should the pedal not drop you have a ...

I am installing a brake box. I need to find the wire that comes off the brake pedal go to the brake pedal and follow the brake arm up until you get to a switch, there you will find the wire.

...all other lights work power to all other fuses used tester at fuses box and plug at pedal replaced tail bulb replaced brake fuse last thing tested fuse at box check p\brake pedal switch they go ...

brake pedal, it will illuminate the blinkers. It is very easy to fix. If you are looking up at the brake pedal, you will see a little switch that when the brake pedal is pressed, touches it. Just take

BRAKE PEDAL GOES TO THE FLOOR. I HAVE REPLACED THE MASTER CYLINDER TWICE AFTER BENCH BLEEDING, REPLACED THE BRAKE BOOSTER . BLED THE SYSTEM 3 TIMES AND THE BRAKE PEDAL STILL GOES TO FLOOR. You need to

Brake failure w/ABS light on My truck brakes has been failing at low speeds for a year or so and no one can seem to figure out why. Now the brakes are faling at high speeds as well where I have to let

...brake pedal would not come back up without me useing my foot to pull it back changed both front braqke pads now the brakes grab and pedal is hard when i turn the trk off the brakes releaase is that a ...

...during the bleeding sequence.to check the master start the vehicule,press the brake pedal and hold down there should not be any downward travel on the pedal,if there is replace the

...brake pedal stiff? brake pedal is extremely hard to press. slows it down but not good enough to drive it. it happened instantly... worked fine one minute then got hard to press the next. You may have ...