2002 Ford F350 Super Duty DRW Reg. Cab "computer communicate scanner" Questions

...Vehicle is not polluting, but will not communicate with the computer to test ODB2 If the scanner or code reader will not communicate with the computer, you need to check the cig lighter fuse

...scanner,then the e c m is most likely defective.Of course the p c m,will not perform correctly if it can not receive the information it needs from the e cm. what year is truck. if its 06 and newer it ...

...communicate. is this model or year able to work with the scanner to access the codes?? in 1993, the computer systems were obd 1. which generally needed battery power to run scanner. 1996 up is obd2 ...

...computer My van is shifting hard....I took it to the mechanic and they said that it will not communicate with the scanner. They have checked the fuses and used multiple scanners with no results. What ...

...communicate with computer . Check engine light does not come on . No ground to ASD relay from computer . Replaced cam sensor .Has 5 volts to cam sensor . Unplug transmission solenoid . Has Batt power ...

...scanner will not communicate with the ABS system as I have Anti-Lock and Brake lights illuminated on the dash. Any ideas what could be the problem? You need a separate scan tool for that because they ...

2001 kia sportage no start,cranks,no spark no fuel.snap on scanner will not communicate when scanners don't communicate usually is because the computer is bad. cranks but no start and no spark

computer will not scan, does not recognize scanner. Any thoughts out there? Does it not recognise scanner or does scanner say " no communication" ? If no communication it maybe a fuse blown causing no

communicate with my on board computer, but I have never had any check engine light problems. I paid them $30 for a failed test, and the dealer wants $100 for me to pay them to reset my computers. Then

...communicate with the scanner on your 2005 Chevy Trailblazer and had to remove the master window switch to start the vehicle, the issue may be related to a faulty or damaged wiring harness. The wiring ...