1999 Ford Contour "brake shoe install procedure" Questions

Ad

Question about Ford Contour

3 Answers

...brake drums on after shoe replacement. 1999 Ford Contour You will need to loosen the bleeder valve and push in on both sides of the brake pistons that hold the shoes apart. This will give you enough ...

Ad

brake shoe springs to prevent fingers from being pinched between spring and shoe web or spring and backing plate. Remove the brake drum. Refer to Brake Drum Replacement Notice: Do not over stretch the

Ad

Question about Ford Contour

1 Answer

...brake shoe return spring (6). Park brake shoe assembly 1500HD, 25 and 35 Series Click to Enlarge Remove the park brake shoe anchor springs and pins. Separate the tips of the shoes from the park brake ...

Question about Ford Contour

1 Answer

...brake shoe support to access adjuster star-wheel. Through the access hole, rotate the adjuster star wheel in the following direction to expand the shoes outward against the drum: Left brake - Rotate ...

Question about Ford Contour

1 Answer

...brake shoe and anchor spring, Fig. 7. On Land Cruiser models, remove front hold-down spring using a suitable tool, then disconnect the parking brake cable from the parking brake bellcrank, Fig. 7. On ...

Question about Ford Contour

1 Answer

...shoe. Position the brake shoes on the backing plate, then install the hold-down springs and retainers. Don't forget to engage the parking brake lever with the cable. Install the parking brake ...

Question about Ford Contour

2 Answers

...Brake Shoe R and R Spring BT-11, or equivalent, then unhook the cable eye from the anchor pin. Fig. 1: Place the brake clamp tool over the ends of the wheel cylinder, then remove the shoe-to-anchor ...

...shoe with the parking brake lever goes to the rear of the vehicle. NOTICE: Do not over-stretch the upper return spring. Damage can occur if it is stretched to more than 204.2 mm (8.04 inches) . ...

...grease to backing plate shoe contact surfaces. Install shoe hold-down pin, then assemble return spring with the pushrod shortened. Pull parking brake lever fully upward. Repeat process several

Question about Ford Contour

1 Answer

...BRAKE NOISE - SHOE AND LINING KIT A shoe and lining kit is available for installation if an Elantra (XD) or Accent (LC) equipped with rear drum brakes exhibits a chattering noise from the rear brakes ...

Not finding what you are looking for?
1999 Ford Contour Logo

807 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1998 Ford Contour
1998 Ford Contour

875 Questions

2000 Ford Contour
2000 Ford Contour

405 Questions

1996 Ford Contour
1996 Ford Contour

353 Questions

1995 Ford Contour
1995 Ford Contour

309 Questions

1997 Ford Contour
1997 Ford Contour

276 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...