1998 Ford Ranger SuperCab "trans 1st" Questions

Ad

Question about Ford Ranger

2 Answers

1st, Im guessing it is not the original trans. My engine is 2.3L, four speed trans with overdrive. How do I identify this trans. The trans gearing is all the same, the rear end gear set is where final

Ad

Question about Ford Ranger

1 Answer

...trans shifts hard into reverse and drive. it also shifts hard from 1st. to 2nd gear. do you have any ideas why that is. it shift great before changing the flywheel Since all gears shift hard, and the ...

Ad

Question about Ford Ranger

1 Answer

...1st step is to loosen your bell housing bolts and drop your starter. The remove your drive shafts the front drive shaft will slide out from the front and then pull it back to the rear. Then you must ...

Question about Ford Ranger

1 Answer

...trans. Hard going in 1st and rev some times. Shifts ok once in gear. Was told to bleed clutch, but no bleeder found on tranny. Has external slave. How does your clutch feel? You might just have to ...

Question about Ford Ranger

1 Answer

...trans. The problem is it's getting difficult to shift into 1st or reverse. Where should I check the fluid? Is there a fluid holder? Hello There Your transmission fluid needs changing. There are two ...

Question about Ford Ranger

1 Answer

...1st gear. When driven a burning oder is present. What is wrong? The trans has failed, is the OD light on the shift handle blinking? in any event you need to get the transmission control module tested ...

...trans hookup in D and R. Have to overrev to get the truck moving. Manual 1st and 2nd OK with engine braking. Fluid level is good. Fuses/relays are good. Are these symptoms of a bad PCM or a ...

...1st and reverse seem o. k., for now. There seems to be a buzzing sound coming from somewhere around or in the transmission in 2nd and 3rd positions. Fluid level is o. k. At one time water got in from ...

trans--try ajustin the tv-cable 1st-its attached to carb and gos to the gears to shift them--get a pressure test done and a test drive by a pro--if he sez rebuild u may want to hold off cause its only

low end slip in 1st and 2nd with auto trans in 2000 Ranger pickup 00 ranger XLT with 88k miles slips in low 1st and 2nd gear check your kick down cable adjustment and fluid level

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

921 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...