1998 Ford Ranger SuperCab "thermostat housing sensors" Questions

Ad

...thermostat housing on 1998 ford ranger. now the temp gauge not working. any ideas!!! You may have disconnected the wire on the sensor.it's close the the thermostat.Check this out. 1995 ford ranger ...

Ad

Question about Ford Ranger

2 Answers

...thermostat housing cap. the unit with the wires in it, at the cap, is the sensor. you can get them at the auto parts store. just need a wrench to replace it. hope this helps check bottom of radiator ...

Ad

...thermostat housing not for sure.help me I would say that the leak s from the overheating and that you need to verify that the coolng fan is coming on, if so then the thermostat should be checked for ...

Question about Ford Ranger

4 Answers

thermostat housing and need to know what it is so I can replace it. Is it screwed into the thermostat housing? If so it should be the coolant temperature sensor. what model ford is this ,Model T model

Question about Ford Ranger

1 Answer

...sensor(it's on the intake near the thermostat housing)?did you somehow disconnect a vaccum hose to the intake(check the EGR valve)? check to make sure all your plug wires are on tight. keep me ...

...Run a code scan, that will save a lot of time. Something easy to check is the temp sensor. It will be by your temp sender at the thermostat housing. Two wire plug, unplug it and put a jumper wire

thermostat in a housing. When replacing it make sure the spring goes twoard the engine. It should be fairly easy, only two bolts. Make sure the engine is cold for your saftey. I am sure you knew that,

...thermostat housing and has a 2 wire connector. Jumping the connector will make the computer think that the engine is hot (warmed up) and will not richen the system. If doing this helps then replace ...

...thermostat housing. Sometimes removing the bolts holding the housing can be a little difficult if there are brackets etc. in the way. remove the housing , remove the thermostat, clean everything to ...

...they don't have the 2.3 thermostat housing change, in it. Probably just the usual thermostat change, and touches very lightly on it. If you have a Motors Shop Manual, then you're 'Cookin' with

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

921 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...