...light is on. 105k miles on vehicle. I was able to "run" it out the first time, but the second time on, the problem remains. Check for Vacuum hose(s) off at the black intake tube and at the vacuum tee ...
or at the vacuum tee on the left rear of the upper intake manifold. The vacuum hose(s) on the tee were a common problem, and would come off, creating a lean condition and set the check engine light on
...Bring it to an auto parts store they can check it for free and tell you what the problem is to a ...
Question about Cars & Trucks
if there is a tow hitch on this truck start there, check wiring at hitch, follow wiring to wear it tees into main harness. this will be near the hitch
light staying on and the 4x4 high ligh pulsing as well as a grinding noise comming from the wheel well. i have exactly to the tee the same prolem with my 2004 explorer it started about 1/2 an hour ago
1997 pathfinder idle speed I recently had my timing belt replaced, along with other parts ~ however now it appears to be shuddering when I stop at lights, etc. The rpm at idle is 700, but revs up and ...
...light came on, checked oil and it was fine. I was looking at my gauges, and the oil pressure seemed really off. It's normally around 20 at idle which is normal then its normally at 40 when you ...
light stays on; the dealer ran a computer diagnostic check. They said that BOTH the left and right bank catalytic converters need to be replaced. The vehicle is a 2003 and has only 86,000 miles. It is
light is on and the code that it is p0420(catalyst system efficiency below threshold, I had my catalytic converter replaced in September of 2009, what else could be the problem or do i need to replace
...toi get a hold of a wiring diagram, and check were the connecton of the two frt doors meet, and are tee off the line, it is more than likly a corroated ...
921 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
477 Questions