1998 Ford Ranger SuperCab "replace egr valve" Questions

Ad

Question about Ford Ranger

2 Answers

) P0403 EGR Circuit Malfunction Hi. you will need to replace the EGR Valve component asap. The Circuit has failed. ((It is recommended to replace the EGR Valve sensor as well when replacing the valve)

Ad

Question about Ford Ranger

2 Answers

...replace the EGR vaccuum selanoid and it dint help at all. The EGR valve works and so dose the EGR vaccuum selanoid. What else could it be? i would still try to change your egr!!! sometimes egr test ...

Ad

egr valve. I have replaced the egr valve but check engine light comes on again after reset showing same code. code p1400 is a DPF EGR sensor CIRCUIT LOW VOLTAGE detected. most likely is a problem with

...replace the vacuum hose to the sensor as well The EGR valve is usually UFO shaped. There is a vacuum line that goes from the top of it to the EGR sensor. That's how it is with my 4.0L SOHC. Hope this ...

...replace the EGR valve on my son's 1999 Ford ranger after getting those codes when the check engine light came on. Replaced the EGR valve and the light came on again with the same codes. Any ideas?? ...

...egr valve and solonoid the iac valve the pressure solonoid plugs wires cleaned the tube for the egr and throttle body passages and still get the code it wont idle without dying and i have no power on ...

egr valve on the car and the problem should be rectified. the egr valve exhaust gas recirculation valve send exhaust gase back to the inlet manifold to keep the air fuel fuel mixture at the right temp

Question about Ford Ranger

1 Answer

1992 ford ranger 2.3 liter engine showing service codes 328 and 332 . How do I fix this problem? on code 328 Replace the EGR valve. and code 332 Replace the EGR valve man !

Question about Ford Ranger

2 Answers

...time its the mass air fow meter is at fault.So i would recomend changing that. was the dtc p0401 egr low flow of so replace the dpfe sensor it will be alot cheeper than the mass air flow sensor ...

EGR valve twice in 6 months. What is causing the EGR valve to fail so frequently? This has a 3 liter V-6, automatic. The problem is now most likely a clogged port in the Intake manifold. In the region

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

921 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...