...injector cleaning tool, but remember that it will clean the Fuel Tank, try to clean the fuel filter, the fuel pump, and all of the fuel lines. This can cause the Fuel Filter to be filled up with ...
Question about Ford Ranger
...fuel mixtures. (long injector squirt times) so hides the lean issues. the ECU has 3 modes, cold, warmup and hot. all 3 work different, (think of 3 ECUs) and win. working scan tool free and no live ...
Question about Ford Ranger
...replaced Coil pack, replaced the following, IAC, TAC, DPFE, MAF, NEW PCM, new Plugs, New wires, new fuel injectors, new temperature sensors, new upper and lower intake gaskets, new fuel filter, fuel ...
Question about Ford Ranger
...with Mode $06 & cylinder misfire count ,if that even works well on your motor Then you look at fuel trim & add short & long together, to get an idea if it is running rich,which would be
...cleaning and repair these trouble spots and see is there any improvement. ==== For more advance DIY'er then you may try this. Use a can of Berryman carburetor clean to locate the vacuum leak. SEE ...
Question about Ford Ranger
...fuel injector remover to clean the fuel injector. Pull off the lines and clean them and put the cleaner in the fuel to clean the injectors and fuel lines. Jag injectors have filters. If you are using ...
Question about Nissan Cars & Trucks
...injector comes under the fuel line.its after the fuel filter. and you can not clean the injector as it needs proper tools its better clean with a automobile fuel callibrators workshop.however you can ...
Question about Ford Ranger
...videos down the right side of the links that may help as well....................CHEERS.. Fuel injector cleaning without expensive tools Improvised fuel injector cleaning with battery and ...
...Fuel Injector #7 - Faulty or Corroded Fuel Injector #7 Connector - Plugged #7 Fuel Injector - Dirty #7 Fuel Injector Possible Solutions- Clean Fuel Injector #7 Connector - Clean Fuel Injector #7 - ...
Question about Cars & Trucks
...fuel injector retainer clips by installing EN-51097 injector retaining clip installer and spreading both sides of the clip evenly. Always use NEW fuel injector collars supplied with injector when ...
921 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
477 Questions