1998 Ford Ranger SuperCab "1999 reverse" Questions

...reverse gear in a 1999 ford ranger transmission? In an automatic trans its controlled by the reverse band which is pressed by a servo which gets pressure from the valve body. This transmission is ...

Wont go into reverse but drives just fine in all the other gears no reverse is a symptom of a failed transmission reverse clutch band, to replace this band requires the trans be overhauled.

Reverse gear went out. Other gears work. It is very cold. I drove my truck and parked it. Went to back up and it made a loud clang like I had hit something. I put it in park to check. When I put it in

98 ranger we lost reverse 99 ranger we lost reverse , we put it in reverse and was backing up heard a pop and reverse was gone what happened? think this is serious like a piston or something ,seek ...

99 ford won't go into reverse and makes a clunking noise this started a few days ago and all fluids are topped off. You mean you can put it in reverse and it won't go? or the shifter won't move into ...

...1999 4x4 ranger comes out of four wheel drive when I reverse. Put manual lockers in it. And remember, you have to back up 50 feet to lock in the hubs, automatic or manual. Not doing this could cause ...

...Reverse on my 1999 Ford Ranger. Can I fix this without replacing the transmission? Probably not but you can try to replace trans. filter and fluid to see if that helps. IF THIS IS AN AUTOMATIC TRANS ...

no reverse in 1999 ranger automatic transmission. no reverse mans the rev clutch has gone out, u must overhaul the trns top fix this

...1999 Dodge Durango and let it sit for varrying amounts of time (30minutes - 8 hours) it has a tendency to say it is in 4wheel part time when I start it again even though the shifter is in 2 wheel and ...

I lost reverse but my forward gears and hi & low range work and I don't hear any clinking og gears.My question is could there be a relay,vaccume line ,or fuse gone bad.(Looking for the easy fix). ...