1992 Ford F350 "loud pop car wont move" Questions

...it wont move. y not? before it stopped moveing it would make a loud metal popping sound when i tunred the steering wheel. check the cv joints,the outer ones near the front wheels are probably

...loud POP sound. Truck stopped moving and I cannot move the small 4wd shifter at all, totally stuck. Had to be towed home. Engine runs fine and manual trans shifter moves fine. If I put in gear, the ...

...reached the top I heard loud pop then it rolled itself halfway back down and wont move at all now.I still hear motor noise though. just renew the mechanism the cable has broke and it comes in one ...

...loud pop then wont move in any gear Most likely fault is you have sheared off the gbox input shaft. You don't say if its manual or auto? Have you checked to see if the hi lo shift is properly set and ...

...loud pop now shifts into gear but car acts like you are holding the brake. you can jack the car up and turn wheels but the opposite wheel turns the opposite way. no codes in it The opposite wheel ...

car because your tranny wont be connected to the wheel and you will have to pay for a tow. This isn't the problem in my case. Mine popped when turning until yesterday. I backed up and it popped loudly

...loud popping sound and 4wheel low truck wont move it a push button 4 wheel you may have a broken transfer box or a damaged locking hub on the wheels that arent used in 4x4 mode, i.e. if your car is ...

...loud pop sound whenever i do try to start it. what is it? check for broken timing belt depending on engine also check for moist ditributor cap inside Your timing is out from the sounds of it. Not ...

...loud pop, then the vehicle wont move in any gear.It then grinds when I try to put it in park. It sounds like you broke a Constant Velocity joint (CV Joint). The pop was probably the joint breaking. ...

...LOUD POP AND I CANT GET INSIDE TO SEE HOW TO FIX the door inside panel is screwed on in 3 or 4 places. look on the underside of the panel for a screw or two, and look for a screw cover underneath ...