1992 Ford F250 "clunk noise shifting manual" Questions

ford f250- 92 diesel 120,000 began clunky noise in output part of trans. losing power, wouldn't engage. day later manually shifted from 1st to 2nd and then drive and went down street was doing fine. ...

...THE 4X4 ENGAGE BUT IT MAKES A VERY LOUD CLUNKING NOISE AND STOPS WORKING...ANY SUGGESTION?? if its manual shift,its internal damage,if its elect.shift could elect.shift motor and,or internal ...

...clunk,is it in the rear end then maybe it is the rear end.you kinda need to be more specific if this information doesn't help i have a 2000 jimmy and my right rear shock at the top of the connector ...

...noise and it does the same when i depress the gas again to resume acceleration. if i leave the manual shifting knob for the transfer case in neutral it drives fine. my question is why? and how do i ...

...noise after each shift 2000 BMW z3 manual 2.8 check the transmission fluid if bad then change it and the filter if it has one if that dont fix it then you have a transmission problem someone in the ...

clunk noise I have been telling the dealer this and now the check engin light is on and now it shifts hard I had this problem before and they put in a cam sensor in and something else about 1" in

...clunk when shifting gears (sometimes). It usually doesn't happen at higher speeds. Basically the same noise happens when I hit bumps in the road. The car is manual transmission--does it sound like a ...

...noise. do get like a clunking sound shifting between first an reverse as you let the clutch out?.if so its probably a universal joint either the one up by the tranny or the one by the rear axle. 4th ...

clunk or no real noise you are right to think it is a sensor. trash can get into the shift solenoids and make a trans act funny. you could drop the pan and replace the solenoids located in the back of

...noise is heard then it could be the cv joints or shafts . sorry I couldn't clear it up more hope this helps. MANUAL SHIFT VALVE LINKAGE BROKEN OR DISCONNECTED.OR TRANSMISSION FLUID LEVEL TOO LOW ...