1992 Ford F250 "460 intake manifold" Questions

what is the firing order for 460 c.i.? Firing order should cast on your intake manifold in the front/top. My truck is a 460 an d it only go's 30 miles an hr

where is the egr valve located on a 1988 ford f-250 with the 460 engine on the intake manifold

Is there two foreign orders for a ford 460 7.5 Not running right 1-5-4-2-6-3-7-8 or 1-3-7-8-6-5-4-2 i think that is them most are imprinted on intake manifold .

...460 engine You blew a head gasket. Remove the head and see if you can see where the gasket failed, have the head shaved and replace gaskets. Sounds like you might have a bad intake gasket or a blown ...

460 in it. It connects to the back side of your intake manifold. It will be a fitting about the diameter of the hose from the booster. If you don't connect this to a good solid vaccume you won'

460.it has fuel pumping to the carb. as long as it is cranking,but as soon as it starts and I let the ignition go to the run position the fuel pumps stop pumping.It then runs till the carb.runs out of

460 in it. I had to pull the distributor out of it to add a valve to the the intake manifold to run another water line to my water cooled headers. I put the distributor back in and fired it up and she

...intake manifold All 1988 460 automotive fords were fuel injected. Carb Solutions do not apply. Use FI troubleshooting techniques. Does it fail due to fuel or voltage? Jumper the fuel pump pin in the ...

Ford 460 Intake Manifold Torque spec What are the Intake Manifold Torque specs for a 84 Ford E350 w/a 460? 22 to 35 ft lbs

...460 lower intake Im changing the lower intake gaskets on my 69 licoln continental and need to know how much torque i should put on the bolts. The motor is a 460. 32 foot lbs No idea but if the ...