1991 Ford F350 "transmission problems moves little" Questions

...transmission fluid cooler. Some models simply don't use a drain valve. ya flush it but might be freeze plugs also leaking old fliuds will do that also terma stat would cuse it also hey nitro bike me ...

transmission if you have too much fluid well its about the same as having too little. The gunk gets into the tiny little orifices and wreaks havoc. The other possibility look at the shifting solenoids

...transmission, it has been very cold outside and my car won't move, the wheels spin but the car only moves a little back and forth there is very little snow in the driveway so it is not stuck it just ...

mounts, when they get worn the transmission will move a little out of place and you will have problems shifting. if it doesn't vibrate probably are your gears and transmission will have to be repaired

...little. Any suggestions? Thanks have u checked the transmission filter? maybe u could also have a clogged line? it sounds like there could be transmission shavings in ur pan too take it off clean it ...

...little. thanks for the help. Have you checked the level of the transmission oil ? The level does not have to be down much to encounter the type pf problem you are having. With the oil warm and the ...

...transmission mounts. Replace them with urethane mounts, they cost a little more but last a lift time of your car and will ensure the engine will not move around to much in the engine bay. Good luck ...

...problems. The next morning started it and put it in reverse, mashed the gas, and it would not move. Husband got in and mashed on the gas and it finally moved but barely. He drove it a little up the ...

...little. Up or down. 3rd. When the car is parked not level the transmission parking PAW or PARKING lock inside the Transmission may have to mush pressure on on it to move easily So, that is probably ...

...little when you put it in reverse is this a used transmission? it sounds like you are low on fluid. check this and if that is not the problem, either the pump is out, torque converter or clutch ...