1989 Ford Ranger "p0304 code blinking engine light" Questions

on just one cylinder and usually under a load.. Code will be p030? Whatever number is listed at the end is the problem cylinder, if it was p0304, that means cylinder #4 is the problem. Hope this helps

...code p0304/p0300 I have replaced - spark plug, plug ignitor, fuel injector and crankshaft position sensor and have cleared code after each component replaced. Used Seafoam and Tectronic to try to ...

...P0304 code and light? I asked the mechanic at midas and he says he doesnt see anything major wrong with the car, but he didnt really look into anything besides the cover gasket he replaced. I asked a ...

...blinking check engine light usually indicates a misfire. It could be a bad plug, a bad coil, a bad wire, or a condition known as carbon tracking.Pull the codes first. This will narrow down what ...

P0304) code and a pending P0304 code on my code scanner. Does anyone think a burnt out oxygen sensor could cause something like this? maybe I burnt my cat converter out? I have a feeling it is the EGR

blinking and the car feels like it is hesitating. We took it to AutoZone and had them hook it up to get the trouble shooting codes. I have a list of codes below that showed up: P0150 P0153 P0300 P0304

...p0304 code on my 2005 mazda mpv. the check engine light is blinking Cylinder 4 is misfiring. Take it to a mechanic and have them take a look at it. Im guessing its the distributor, Spark plug, or ...

...p0304 code. Light steady then flashes. many part repla My van has been misfiring and idling mildly to etremely ruff at times. The check engine light comes on steady and then when the van warms up, ...

...P0304 code misfire. The engine light is on and is blinking when car is driving uphill. What is the solution here? The engine light is on because have a fault code P0304, it means Cylinder 4 Misfire ...

...CODE P0304 CYLINDER MISFIRE CAME UP I CHANGE SPARK PLUGS AND BOOTS BUT CAR STILL DRIVES ROUGH SHAKES AND WHEN PARKED FEELS LIKE ITS GOING TO STALL. The P0304 indicates the #4 cylinder is misfiring. ...