Question about Ford Ranger
lift gate sup The liftgate will not stay open. There is fluid showing below the support cylinder on the drivers side. I believe the cylinders are shot and need instructions on replacing ford freestyle
...lift gate? Trying to locate the camera lens on the liftgate. Big snow fall last night and the radio screen display is white. check under the lift gate handle or in the handle, a quick trick would be ...
...lift gate wont stay up when opened, how do I replace the pistons and where do I find them (ontario) They snap off,and snap on,the auto parts stores can order them if they do not already have them. ...
Question about Chevrolet Cars & Trucks
to lock in place and fall 6-8 inches crashing into your head. go down and lock. Does this have gas filled cylinders that lift the gate or assist it to lift? If so replace them, they have lost pressure
...lift gate goes to the open position does it make a grinding noise when it reaches the fully opened position and then closes, If so the gear driven assembly may have had a tooth broken on one of the ...
lift gate falling down I told you before that you need new liftgate struts. These sell for $55.00 a pair on ebay. You will need someone handy to remove old ones and install the new ones and he will ...
...lift gate with something so it does not fall down on you and remove the metal clips on the end of the support strut.Should have one on each end.They should come right off.The clips are spring ...
Question about Ford Ranger
...lift gate, free of charge. Owners were mailed interim notices on August 3, 2015. Owners will receive a second notice when remedy parts become available. Owners may contact Buick customer service at ...
...lift Or at your local parts store or ebay. Be careful not to drop it into you or drop it to hard and brake the glass. I would see if there are any recalls on this for your model and vin number too. ...
gate but it will not open. Any suggestions would be appreciated. The door unlocks and locks. The release handle and latch assembly are two separate parts. Between them is a control rod that falls off.
671 questions posted
Usually answered in minutes!
642 Questions
645 Questions
573 Questions
562 Questions
558 Questions