1989 Ford Bronco "window motor replace" Questions

...window motor Bronco 1989 Rear window down, how to replace motor with the window down, need to move glass to up position. take off the access cover and try to get to the motor bolts. might have to ...

...motor still works, reposition the window in the fully up position and reinstall the motor. The motor could have simply just jammed itself, or came off the track. If it doesn't work, it may be time to ...

...window motor worked.what can i check?help! your rear window is probably jammed or has come off the track the back window motor maybe making noise but it has plastic gear that may be stripped. You ...

...move it to the down position, if you cannot them try and connect that regulator to another window motor, and get it to the down position that way. then reinstall the regulator and window, good ...

...window motor does not work remove the access panel on the tailgate and test to see if there is power to the motor. if there isn't check the fuse, wire and the safety switch either located on the ...

...window won't go back up. I believe the motor is shot, and I probably need to fix it, so how would I go about doing that? does anyone have instructions on replacing the motor? first try to replace the ...

...window is down. The motor will not run in either direction. I disconnected the leads and tested with 12 volt directly from the battery AND reversed the polarity-nothing. Is there a way to manually ...

...window motor works, but the window will not go up or down Is there a track it may have come off of? ford window motors have nylon bearings to work the drive gear, and the crumble. check and see if ...

...window motor burns out on those pretty frequently. Check to see if you have power to the motor before replacing it but if your fuse is good and its not working then pretty sure it is the motor. There ...

...motor on tailgate window on a 1987 ford bronco tailgate window will not go down how do i replace motor or atleast get window down so tailgate will open You will likely have to remove the panel from ...