1989 Ford Bronco "low range" Questions

...low range does not ingage nor does the light dunno if this is your solution but your bronco only will go in low range if it is in nuetral. not park but nuetral only start your bronco put it in 4 high ...

...Range Sensor Circ Low Input 17091 P0708 Transm.Range Sensor Circ High Input 17092 P0710 Transm.Fluid Temp.Sensor Circ. Malfunction 17094 P0711 Transm.Fluid Temp.Sensor Circ. Range/Performance 17095 ...

how to put bronco in 4x4 low With the engine running, put your foot on the brake and shift the transmission to neutral. Now move the transfer case shifter forward till it stops then push it down ...

The transfer case shifts to both high and low range but the front hubs don't lock in. Are there common problems to this? replace both locking hubs,if 1 side breaks the other side wont do any good

89 Bronco full size. 4x4 locks in and out but transmission stays in low range. What could be wrong? Wheel locks are bad.

...low range not working I found on my '92 that I had to pull the shift actuator motor off of the transfer case and re-apply the grease to the shaft as the old grease was stiff a non-pliable. It has not ...

...out of gas when there more the a 1/2 tank and low range indicator light is on. Fuel pump may be weak or the fuel filter or injectors may be restricted. Water in fuel. Ignition may have weak

...low range button. It is a 302 not 351 if that matters. It could be the switch, a fuse, a relay, the motor that engages the transfer case (very common problem) or the transfer case itself. Disconnect ...

...low range Got a 2005 Mitsubishi mk triton. can select hi range but no low range, will only go into low range if I get the transfer lever in the right spot, once I let go of the transfer lever, comes ...

...low range with my 1989 Ford Ranger, the lights indicate that both 4x4 and low range are on, when I push the low range button to disengage then it flashes, however still remains in low range. Can I ...