Question about Ford F-150
...ignition switch electrical portoin above brake pedal on steering column shack ignition switch for a 2000 F 150 1/2 ton truck V6 4.2 engine how to turn switch to run position, for i can take and ...
...IGNITION SWITCH PROBLEM THE IGNITION SWITCH WILL START TRUCK, BUT WILL TURN BACK AND CUT OFF IF NOT HELD. CHANGED SWITCH AND HAVE SAME PROBLEM WITH NEW ONE. AS A RESULT POWER WINDOWS AND WINDSHIELD ...
Question about Ford F-150
...IGNITION SWITCH IS TURNED OFF AND CHECK ENGINE LIGHT GOES OFF WHEN IGNITION SWITCH IS TURNED ON. WILL NOT CRANK AND FUEL PUMP IS NOT COMING ON Check ignition switch wiring and for internal
...ignition switch? ignition switch.if it was a starter problem, it would make some kind of weird noise. Most likely the switch is bad and not making contact while in the start position. The engine is ...
Question about Ford F-150
...6 cyl ignition switch turns the starter when the battery is connected when battery is connected the ignition switch tries to start the truck Replace the switch, they have a problem that causes
Question about Ford F-150
...ignition switch and have changed switch. need help for it's my work truck. look in the positive battery connection. it splits in two, one goes directly to the starter and the other goes to the ...
...is the glitch in the ignition switch itself or somewhere else in the column ? my truck had the same problem and installed a new ignition switch. problem solved plus its an easy replacement and
Question about Ford F-150
...ignition switch [o.k], checked Ignition Module seems to be o.k but everytime I connect positive battery post cable smokes & sparks @ post & 2ndary Ignition . could I have a short @ the relay ...
...ignition switch was replaced. Checked connections from installing new ignition switch, checked and replaced all fuses. Hi!! I have a 89 F-350 and had same problem. Check your turn signal switch ...
...ignition switch on a ford f150????? lossen up the two screws on the switch ,on the steering columturn the tumbler to acc , push or pull the switch accordingly then tighten the screws, thats it your ...
325 questions posted
Usually answered in minutes!
2,636 Questions
1,214 Questions
1,298 Questions
1,160 Questions
1,038 Questions