...egr valve and crank sensor Hi, Eric Lets tackle the EGR code first. Your vehicle is equipped with an electronic EGR valve, and the code is referring to an error with the pintle position. Your first ...
...egr valve exsasive flow Very common problem. EGR valves die on Powersmokes all the time. First, has anyone messed with your MAF recently? This can fool the PCM into thinking there is an EGR problem. ...
...EGR valve position sensor, replaced the EGR solenoid, checked the wiring harness and used a test light KOEO from the pos side of the battery, no breaks or grounds. Replaced the ECM with a reman, ...
...egr valve & position sensor located on a 1995 ford f-350 with a 460 The egr valve is located on the valve cover and has a 1/2 hose connected to it going to air cleaner. The position sensor is ...
loss of power on start up and pulling on a ford F350 6.0 Check the egr valve, We had alot of issues like you describe when these were new, replaced egr valve and it cured problem
...guides. If you have high compression, my suggestion is to replace it with an older vacuum operated one. Here is a pageful to choose from:
p0401 egr flow insufficient you may have a faulty egr valve or perhaps a plugged up egr port in the intake.
...egr valve. truck ran good for a few miles then started missing again with no turbo pressure.. anyone have this problem?? any recommendations would be great. there is no wastegate on a 6.0l turbo. its ...
carbon build up under egr valve An updated EGR spacer plate help to keep the buildup down, but some will always happen.
Question about Ford F-350
...EGR Valve.. It sits right on top of the engine (from the front bumper looking at the engine) just forward and to the left of the oil filter. Two 8mm bolts and it comes off ( rotate back and forth ...
97 questions posted
Usually answered in minutes!
448 Questions
438 Questions
414 Questions
360 Questions
311 Questions