1985 Ford F150 "removing steering wheel 85" Questions

Ad

...steering wheel on 85 dodge diplomat I need to remove the steering wheel in order to find out what is wrong with my steering column Disconnect the negative battery terminal. Remove the horn pad on the ...

Ad

Question about Ford F-150

1 Answer

...Wheel hub Steering knuckle cam and hand tighten the bolt Coil spring Shock absorber lower nut. Torque the nut to 85 ft. lbs. (115 Nm) for 2002-04 models; 129 ft. lbs. (175 Nm). Upper ball joint. ...

Ad

...column replacement and reinstall it in a 85 Chevy K10 After removing the steering column covers you may need to remove the steering wheel, air bag and other components to replace the ignition

...steering wheel off but how do i remove all the other junk to get to the tumbler? i removed the steering wheel but how do i remove all of the other **** to get to the tumbler!!!??? You need to remove ...

Question about Ford F-150

1 Answer

...removing Fuse 10 in the fuse junction panel. Crank engine 30 seconds, check fluid level and add if required. NOTE: Do not hold steering wheel on stops. Crank engine 30 seconds while cycling the ...

...steering wheel puller some folks hit it with a hammer but that is so not good!! Wheel pullers are cheap enough a single 1/4" thick plate steel with a 3/8" hole drilled on each end, one hole may be ...

Question about Ford F-150

2 Answers

...steering wheel/column,but i'm not getting the ground when I push the horn.It springs back and feels normal.I would like to ground the horn wire coming out of the column harness to see if the relay ...

...steering wheel against the stops for more than 3 to 5 seconds at a time. Damage to the power steering pump can occur. Cycle the steering wheel fully from stop to stop 10 times. Stop the engine. ...

steering gear through LH wheel well. Remove and discard the O-rings. Installation Install new TeflonĀ® O-rings on line fittings as outlined. Place steering gear retaining bolts in steering gear housing

...STEERING GEAR RETAINING NUTS BOLTS.REMOVE REAR SUBFRAME BOLTS.USE WIRE TO SUPPORT EXHAUST COMPONENTS UNLESS YOU ARE REMOVING THEM COMPLETELY.SUPPORT THE EXHAUST SYSTEM FLEX TUBE AND REMOVE THE FLEX ...

Not finding what you are looking for?
Cars & Trucks Logo

598 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...