1985 Ford F150 "clutch master cylinder bleeding" Questions

Ad

Question about Ford F-150

2 Answers

...clutch master cyclinder, still having problems with the clutch pedal being low, i bleeded the clutch several time but it won't come up any higher, any suggesstions. I assume that the master cylinder ...

Ad

...clutch master cylinder. Sounds like air got into the system. It could 1 of 3 differant things. The most likely is there is a leak in the master cylinder for the clutch this the one that hooks to the ...

Ad

a brake line bleed. Press the clutch peddle and have someone open the bleed screw at the clutch lever arm - repeat 3 times. top off the brake fluid in the clutch master cylinder and you should be good

...clutch master cylider w/ot 3 brake fluid and leave the cap loose. Then go under smd open the slave cylinder bleeder.let it drip untill the bubbles stop. Don't let the master cylinder get low. Top it ...

...clutch master cylinder reservoir make sure it is full of brake fluid.if not you have to bleed the system.you will need a helper to aid you bleeding the clutch master cylinder slave

first The clutch slave (or master) cylinder is failing. There's a tiny chance bleeding the clutch might help. Check the fluid level, but the clutch slave cylinder is very common in Ford trucks to fail

Question about Ford F-150

2 Answers

...clutch master cylinder. Under normal circumstances, air should not enter the system when the quick disconnect hydraulic line fittings have been disconnected. The procedure is very similar to bleeding ...

...a brake caliper, perform the bleed procedure just like a brake, pump clutch and open slave bleeder, repeat untill all air is no longer noticed. keep master filled with fluid and top off when ...

...master clutch cylinder (the fluid doesn't move, ie bubble and yes the fluid is full DOT 3 brake fluid) I am planning on replacing the clutch master cylinder, if that doesn't solve the problem in what ...

...clutch master cylinder. If low or empty check for leaks. If empty, no leaks try filling and bleeding the air out.(the bleeder is on the slave cylinder if it has a piston type cylinder). If that ...

Not finding what you are looking for?
Cars & Trucks Logo

598 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 Ford F150
2004 Ford F150

2,636 Questions

1990 Ford F150
1990 Ford F150

1,214 Questions

2005 Ford F-150
2005 Ford F-150

1,298 Questions

2006 Ford F-150
2006 Ford F-150

1,038 Questions

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...