1983 Ford Fairmont "port wich" Questions

... if you do not know wich one it is just get a tester and test all the battery by hooking you tester to the negative port and check the fuses. let me know if this helped you thank you www. ...

...are 2 ports? wich one do i use? If you want just to add freon , you need to use port with blue cap(low side) , if caps are not colored then the low side port always smaller then high side in

...by the brake and gas pedals or on the driver side of your dash board and when you find the port fuse on the back of the port it will tell you wich fuse is it all fuses are numberd hope this

...is normal once it clears up, how ever if it si constant and heavy it means coolant is entering the cyninders .wich means you may have a blown head gasket around a water port also check head for ...

...need to be check for pressure at reverse port in transmission,and scanner diagnosis.it coul be a servo wich lock the rear band to inverse a planetary rotation inside,so its better dont be

...port. Can you tell me where it is? hello there: your low pressure valve will be along the low pressure line wich will be the small line coming off the compressor follow it and you may also need to ...

wich line goes from MC to proportioning valve Your vehicle is equipped with antilock brakes. It either has a "Rear Antilock Brake System" (RABS) or it is equipped with "4 Wheel Anti-Lock" (4WAL). Some

...port test for reverse,it could be a servopiston wich hold the rear band to hold the planetary,and invert the rotation ok,the foward clutches is the same for reverse,so the clutch is not burnt,it will ...

...first thing I would do is have the cooling system flushed, that sludge will clog up the waterpump ports and tubes in the radiator..could cause motor ...

...wich port the senser goes into as long as the thred is the same. There sometimes a small hose that atatches to the back of the pump if not the pump comes with a plug. Like I said ther is several ...